OX CNC Router Machine Kit 4 Axis Belt Driven CNC Milling Carving DIY Engraver. This CNC Router kit includes everything needed to complete the mechanical portion of the OX CNC Machine. This includes four NEMA23 (175ozin / 345ozin) Stepper Motors and GT3 Pulley's/Belt.
Materials you can Mill/Cut/Carve & Engrave. Specs of Nema23 1.26N. Specs of Nema23 2.45N.
M Nema23 Stepper Motors / NO Motors. Extrusions are new and M5 tapped as where it is necessary! MDF Working Table, Spindle, Controller etc and other electronics are not included with this kit.
Any Mains power connections must be installed by a Licensed electrician or suitability qualified person! To clarify the Z Travel distance, this is not the max cutting depth. Z travel is the distance downwards it can travel before hitting the spoiler board supports. This kit has a Z travel of 69mm, if you had a 12mm spoiler board, this will reduce the Z travel to 57mm.In this case 57mm is maximum thickness of material that will fit on the machine. To calculate the max cutting depth for a chosen piece of material it is. Max Cutting Depth = Z travel - Material Thickness.
For instance a setup with a 12mm spoiler board, the max Z travel is 57mm, if we wanted to cut into a material 30mm thick the max cutting depth would be: Max Cutting Depth = 57 - 30 = 27mm This means with a 30mm piece of material we would not be able to cut the whole way through. The max thickness that can be cut the whole way through is half the Z travel. So with a Z travel of 57mm, we could cut the whole way through a piece of material 28.5mm thick.
" V-Slot " and " C-BEAM " are registered trademarks of OpenBuilds LLC as released under the Creative Commons Licence "Attribution-ShareAlike" All our components are designed to work and are fully compatible with the products produced by OpenBuilds. Return must include all original package and accesorries, item must in good condition. Please do NOT leave negative or neutral feedback without asking for help. We will try our best to solve your problem to your satisfaction.
We are always here with you! The item "OX CNC Router Machine Kit 4 Axis Belt Driven CNC Milling Carving DIY Engraver" is in sale since Thursday, February 27, 2020. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "bulkman3d" and is located in GuangDong.
This item can be shipped worldwide.