Mill Axis Router

Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill

Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill
Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill
Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill
Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill
Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill
Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill
Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill

Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill

Newest 1010 Workbee CNC 4Axis Router Machine Full Kit with Tingle Tension System. CNC Full Kit with Tingle Tension System 1000x1000mm. This kit is the newest version available including a new TingleTension System to minimise Lead Screw'Whip'! This is the BULK-MAN 3D Kit of the Open Source Workbee CNC Machine.

The Workbee CNC Machine was originally designed by Mark Carew and the design is licensed under CC - Attribution - CC BY. It is a super strong, accurate and easy to assemble CNC machine. The WorkBee CNC design has gone through different changes. Originally had the leadscrews placed in compression. With the major differences being the use of.

Tingle Tension System with Longer leadscrews. I n the X and Y Axis. This helps to solve the problem of Whipping when for long length or faster Speed.

CBeam, VSlot, Xtreme Solid V-Wheels and TR8x8(P2) Leadscrews. It has been carefully designed and can accurately cut foams, woods, plastics and aluminium to.

With a WorkBee CNC Kit you can manufacture functional engineering parts, toys, signs, or whatever you can imagine without leaving the workshop. Functional engineering parts, toys, signs or anything else that can be imagined, can be made on the Workbee CNC Machine. The BULK-MAN 3D Kit has a couple of small differences from the design published by Mark Carew. Most notably are the use of. Black Corner Connectors in place of Cast Brackets in order to increase rigidity.

The Cable Drag Chain bundle. Contains all the hardware for mounting Cable Drag Chains on your WorkBee, Ox CNC or other CNC machines to help with cable management. Are perfectly used for engraving machine. 5kW Air Cooled Spindle Bundle. Contains all the hardware for mounting a the Spindle on your WorkBee or other CNC machine.

1.5kW Water Cooled Spindle Bundle. Contains all the hardware for mounting the Spindle on your WorkBee or other CNC machine. Base/waste board is NOT included. WorkBee with longer lead screws.

Materials you can Mill/Cut/Carve & Engrave. 85mm (with a 12mm base board).

TR8x8(P2) ACME Lead Screw. Specs of Nema23 1.26N. Specs of 1.5 KW Air Cooled Spindle.

Spec: f 65 x 205 mm. Voltage: 220 250 V or 110 V.

Run-out off: less than 0.005 mm. VFD Inverter 1.5 kW 220 V or 110 V. Size: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.175mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.35mm, 6.5mm, 7mm. Specs of 1.5KW Water Cooled Spindle.

Spec: f 80 x 205 mm. Workbee CNC Mechanical Kit 10001000mm.

1.5KW Water /Air Cooled Spindle Bundle. Extrusions are new and M5 tapped as where it is necessary! 1 The voltage of 2.2KW Water is default to send 110V , if need 220V , please leave message.

2 This kit includes 4 x. The maximum recommended speed for Lead Screws 1000mm or greater is 400RPM. This Machine does not include MDF Working Table, Drill Bits.

(available at the local hardware store). Mach3 Software is not included with this kit. Any Mains power connections must be installed by a Licensed electrician or suitability qualified person! To clarify the Z Travel, this is not the max cutting depth or travel range of the acuator. Z Travel is the distance dowmwards it can.

The WorkBee has two spoilerboard support configurations. One with a travel of 66mm, and a lower one with a travel of 106mm. The reason for the two. Configurations is that if the machine is always used to cut thin materials, for accuracy reasons it is better. To have the work piece as closed to the. Z-Actuator as possible, so in this case the machine should be setup in the higher 66mm.

The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. 54mm is maximum thickness of material that will fit on the machine. To calculate the max cutting depth for a chosen piece of material it is. Max Cutting Depth = Z travel - Material Thickness.

For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max. Max Cutting Depth = 54 - 30 = 24mm. This means with a 30mm piece of material it would not be possible to cut it the whole way though.

The max thickness that can. Be cut the whole way through.

Is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material that. Could be cut the whole way through. Configuration the maximum thickness that can be cut the whole way. 750 x 750mm 550 x 520mm. 750 x 1000mm 550 x 770mm. 1000 x 1000mm 800 x 770mm. 1000 x 1500mm 800 x 1270mm. 54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard.

The spolierboard supports have two height. The maximums for each configuration. Drive Systerm - ACME Lead Screws. Linear Guides - Polycarbonate wheels on anodised CBeam VSlot Extrusion. Motors - NEMA23 175oz or 345ozin Stepper Motors (X, Y & Z).

Accuracy - 0.05 - 0.10mm. " V-Slot " and " C-BEAM " are registered trademarks of OpenBuilds LLC as released under the Creative Commons Licence "Attribution-ShareAlike" All our components are designed to work and are fully compatible with the products produced by OpenBuilds. Return must include all original package and accesorries, item must in good condition. Please do NOT leave negative or neutral feedback without asking for help. We will try our best to solve your problem to your satisfaction. We are always here with you!

The item "Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill" is in sale since Wednesday, February 26, 2020. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printer Parts". The seller is "bulkman3d" and is located in GuangDong.

This item can be shipped worldwide.
  • Brand: BULK-MAN 3D
  • MPN: Does Not Apply
  • Item Name: Workbee CNC Machine Full Kit
  • Model Number: WB1010-GRBL-1.5KWA110V
  • Size: 1000 x 1000mm
  • Drive System: TR8x8(P2) ACME Lead Screw
  • Motors: NEMA23 1.26N.m Stepper Motors
  • Accuracy: 0.05 - 0.10mm
  • Frame Material: 6063-T5 Aluminum
  • Controller Bundles: GRBL
  • Spindle Specs: 1.5KW Air or Water Cooled
  • Type: Workbee CNC Mechanical Kit
  • Color: silver
  • Material: 6063-T5 Aluminum
  • Country/Region of Manufacture: GuangDong of China

Newest 4Axis Workbee CNC Router Machine Full Kit with Tension System CNC Mill