Mill Axis Router

Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System

Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System
Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System
Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System
Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System
Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System
Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System

Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System

Newest Version WorkBee 1515 CNC Full Kit with Tingle Tension System 1500x1500mm. This kit is the newest version available including a new Tension System to minimise Lead Screw'Whip'!

This is the BULK-MAN 3D Kit of the Open Source Workbee CNC Machine. The Workbee CNC Machine was originally designed by Mark Carew and the design is licensed under CC - Attribution - CC BY.

It is a super strong, accurate and easy to assemble CNC machine. Based on CBeam, VSlot, Xtreme Solid V Wheels and TR8x8(P2) Leadscrews it is strong, accurate and reliable.

It has been designed to accurately cut foams, woods, plastics and aluminum to 0.05-0.10mm accuracy or better. Functional engineering parts, toys, signs or anything else that can be imagined, can be made on the Workbee CNC Machine. The BULK-MAN 3D Kit has a couple of small differences from the design published by Mark Carew.

Most notably are the use of. Black Corner Connectors in place of Cast Brackets in order to increase rigidity. The Cable Drag Chain bundle.

Contains all the hardware for mounting Cable Drag Chains on your WorkBee, Ox CNC or other CNC machines to help with cable management. Are perfectly used for engraving machine. The 2.2kW Water Cooled Spindle Bundle.

Contains all the hardware for mounting the Spindle on your WorkBee or other CNC machines. The 1.5kW Water Cooled Spindle Bundle contains all the hardware for mounting a the Spindle on your WorkBee or other CNC machine. Base/waste board is NOT included. WorkBee with longer lead screws. Materials you can Mill/Cut/Carve & Engrave.

85mm (with a 12mm base board). TR8x8(P2) ACME Lead Screw. 1500mm x 1500mm (not including motors).

Specs of Nema23 2.45N. Specs of 1.5 KW Air Cooled Spindle. Spec: f 65 x 205 mm. Voltage: 220 250 V or 110 V. Run-out off: less than 0.005 mm.

VFD Inverter 1.5 kW 220 V or 110 V. Size: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.175mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.35mm, 6.5mm, 7mm. Specs of 1.5KW Water Cooled Spindle. Spec: f 80 x 205 mm. Workbee CNC Mechanical Kit 15001500mm.

Nema23 High Torque 2.45N. 1.5KW Water /Air Cooled Spindle Bundle.

Extrusions are new and M5 tapped as where it is necessary! 1 The voltage of 2.2KW Water is default to send 110V , if need 220V , please leave message. 2 This kit includes 4 x. Xtreme solid v wheel kit. Cable Drag Chain - 15x30mm.

8mm M5 Low Profile Screws. 15mm M5 Low Profile Screws. 10mm M4 Button Head Screws. 1.5KW Air Cooled Spindle Combo.

1.5KW Air Cooled Spindle (DIA 65mm). Cable 4 Core Shielded (per meter). Spindle Mount Kit (ID 65mm). M5 Drop In Tee Nuts.

ER11 collet chuck set from 1 mm to 7 mm. E-Stop Switch + E-Stop Cable. 4 Pin Dupont Wire - 300mm. 2 Pin Dupont Wire - 300mm. Arduino(Compatible) UNO R3 with usb cable.

MEAN WELL Power Supply - 24V 350W. The maximum recommended speed for Lead Screws 1000mm or greater is 400RPM.

This Machine does not include MDF Working Table, Drill Bits. (available at the local hardware store).

Mach3 Software is not included with this kit. Any Mains power connections must be installed by a Licensed electrician or suitability qualified person!

To clarify the Z Travel, this is not the max cutting depth or travel range of the acuator. Z Travel is the distance dowmwards it can. The WorkBee has two spoilerboard support configurations. One with a travel of 66mm, and a lower one with a travel of 106mm. The reason for the two.

Configurations is that if the machine is always used to cut thin materials, for accuracy reasons it is better. To have the work piece as closed to the. Z-Actuator as possible, so in this case the machine should be setup in the higher 66mm. The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. 54mm is maximum thickness of material that will fit on the machine.

To calculate the max cutting depth for a chosen piece of material it is. Max Cutting Depth = Z travel - Material Thickness. For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max.

Max Cutting Depth = 54 - 30 = 24mm. This means with a 30mm piece of material it would not be possible to cut it the whole way though. The max thickness that can. Be cut the whole way through.

Is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material that. Could be cut the whole way through. Configuration the maximum thickness that can be cut the whole way.

750 x 750mm 550 x 520mm. 750 x 1000mm 550 x 770mm. 1000 x 1000mm 800 x 770mm.

1000 x 1500mm 800 x 1270mm. 54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard.

The spolierboard supports have two height. The maximums for each configuration.

Drive Systerm - ACME Lead Screws. Linear Guides - Polycarbonate wheels on anodised CBeam VSlot Extrusion. Motors - NEMA23 175oz or 345ozin Stepper Motors (X, Y & Z).

Accuracy - 0.05 - 0.10mm. " V-Slot " and " C-BEAM " are registered trademarks of OpenBuilds LLC as released under the Creative Commons Licence "Attribution-ShareAlike" All our components are designed to work and are fully compatible with the products produced by OpenBuilds. Return must include all original package and accesorries, item must in good condition.

Please do NOT leave negative or neutral feedback without asking for help. We will try our best to solve your problem to your satisfaction. We are always here with you! The item "Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System" is in sale since Wednesday, February 26, 2020.

This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printer Parts". The seller is "bulkman3d" and is located in GuangDong. This item can be shipped worldwide.

  • Brand: BULK-MAN 3D
  • MPN: Does Not Apply
  • Item Name: Workbee CNC Machine Full Kit
  • Model Number: WB1515-S-GRBL-1.5KWW/A110V
  • Size: 1500 x 1500mm
  • Drive System: TR8x8(P2) ACME Lead Screw
  • Motors: NEMA23 345 oz*in Stepper Motors
  • Accuracy: 0.05 - 0.10mm
  • Frame Material: 6063-T5 Aluminum
  • Controller Bundles: GRBL
  • Spindle Specs: 1.5KW Water/Air Cooled
  • Note: Leave message Air or Water Cooled,110V or 220V


Newest 1515 WorkBee CNC Router 4 Axis Milling Machine with Tingle Tension System