Mill Axis Router

CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx

CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx
CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx
CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx
CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx
CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx
CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx

CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx

Workbee CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling. This WorkBee is a super strong, accurate and easy to assemble CNC machine. Based on C-Beam, V-Slot, Xtreme Solid V-Wheels and TR8x8(P2) Leadscrews it is reliable. It has been carefully designed and can accurately cut foams, woods, plastics and aluminium to 0.1-0.2 mm accuracy or better.

With a WorkBee CNC Kit you can manufacture functional engineering parts, toys, signs, or whatever you can imagine without leaving the workshop. Compatible Material for Cutting/Milling/Engraving: Aluminium / Hard Wood / Soft Wood / Oak / Plexi Glass / Delrin / HDPE / Foam cnc material This Kits Includes: WorkBee CNC Mechanical Kit 4 x Nema23 1.26N. Specs of Nema23 1.26N. M Stepper Motor: NEMA 23 Shaft Size: 1/4 Step Angle: 1.8 Holding Torque: 1.26 N.

M Rated voltage: 3.36 V Rated current: 2.8 A Specs of Nema23 2.45N. M Stepper Motor: NEMA 23 (High Torque) Shaft Size: 1/4 Step Angle: 1.8 Holding Torque: 2.45 N. M Rated voltage: 3.6 V Rated current: 3 A Please note: MDF Working Table, Spindle, Driver Board etc and other electronics are not included with this kit. 3 Options: 4pcs Nema-1.26N. M: The frame kit with 4pcs Nema23 1.26N. M Stepper Motors 4pcs Nema-2.45N. M: The frame kit with 4pcs High Torque Nema23 2.45N.

M Stepper Motors No Motors: The frame kit only no Stepper Motors included The WorkBee CNC Complete Kit Specs: Item No. The spoilerboard supports have two height configurations, these are the maximums for each configuration. Motion Drive System - ACME Lead Screws Or GT3 Timing Belts Linear Guides - Polycarbonate wheels on anodised C-Beam V-Slot Extrusion.

Motors - NEMA23 175oz Stepper Motors (X, Y & Z) Accuracy - 0.05 - 0.10mm (Screw Driven) Or 0.10 - 0.20mm (Belt Driven) Note - Maximum recommended speed for Lead Screws 1000mm or greater is 400RPM. The WorkBee CNC also has two different spoiler board configurations. One for shallow work up to 27mm deep, and a lowered setup to 47mm deep. Having this option is beneficial.

If the plan is to only cut thin materials, it is a waste of rigidity to have the Z-Axis reach down more than needed. The Screw Driven version, right image above, shows the lowered configuration. Z Travel Explained: To clarify the Z Travel, this is not the max cutting depth or the travel range of the actuator. Z travel is the distance downwards it can travel before hitting the spoiler board supports.

The WorkBee has two spoilerboard support configurations. One with a travel of 66mm, and a lower one with a travel of 106mm.

The reason for the two configurations is that if the machine is always used to cut thin materials, for accuracy reasons it is better to have the work piece as close to the Z-Actuator as possible, so in this case the machine should be setup in the higher 66mm travel configuration. The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. In this case 54mm is maximum thickness of material that will fit on the machine. To calculate the max cutting depth for a chosen piece of material it is: Max Cutting Depth = Z travel Material Thickness For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max cutting depth would be: Max Cutting Depth = 54 30 = 24mm This means with a 30mm piece of material it would not be possible to cut it the whole way through. The max thickness that can be cut the whole way through is half the Z travel.

So with a Z travel of 55mm, 27mm is the maximum thickness of material that could be cut the whole way through. And for the lower configuration the maximum thickness that can be cut the whole way through is 47mm.

Frame Size 500 x 750mm 750 x 750mm 750 x 1000mm 1000 x 1000mm 1000 x 1500mm 1500 x 1500mm. Working Area 300 x 520mm 550 x 520mm 550 x 770mm 800 x 770mm 800 x 1270mm 1300 x 1270mm. 54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard. The spoilerboard supports have two height configuration, these are the maximums for each configuration. Drive System - ACME Lead Screws Or GT3 Timing Belts Linear Guides - Polycarbonate wheels on anodised C-Beam V-Slot Extrusion. Motors - NEMA23 175oz Stepper Motors (X, Y & Z) Accuracy - 0.05 - 0.10mm (Screw Driven) Or 0.10 - 0.20mm (Belt Driven). Any product you return must be in the same condition you received it and in the original packaging. Best quality products with great prices! Our aim is to provide an excellent services and products with amazing prices for you or your business.

Our dedicated staff are happy to help Less than 24 hour response time. The item "CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx" is in sale since Saturday, November 23, 2019. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printer Parts". The seller is "katzaqualityproducts" and is located in Mainland.

This item can be shipped worldwide.
  • Frame Material: 6063-T5 Aluminum
  • V-Slot Anodized: Black & Sliver Anodized
  • Item Type: Mechanical Kit/Hardware Parts
  • Model Number: BM-WB
  • Applicable Regions: As shown in the picture
  • MPN: Does Not Apply
  • Brand: BULK-MAN 3D
  • Item: WorkBee CNC Machanical Kit
  • Accuracy: 0.05 - 0.10mm (Screw) Or 0.10 - 0.20mm (Belt)
  • Drive System: ACME Lead Screws Or GT3 Timing Belts

CNC Router Machine Kit 4 Axis Woodworking Metal Engraver Milling Machine FedEx